PVC STRIP DOORS AND ROLLS

2 mm thick x 200 mm wide in 50 metre rolls - standard or polar grade
2 mm thick x 300 mm wide in 50 metre rolls - standard or polar grade

2.5 mm thick x 400 mm wide in 50 metre rolls - standard grade

3 mm thick x 300 mm wide in 50 metre rolls - standard or polar grade

4 mm thick x 400 mm wide in 50 metre rolls - standard or polar grade

50 m rolls can be split to offer smaller lengths.
Deliveries 3 day or next day at extra cost if required urgently

EASYCLIP PVC STRIP CURTAINS

Stainless steel headgear, cut to length to suit your opening, or supplied in set lengths.
Clips to width to suit PVC width, rivetted to top of each strip.

Clips drop onto fingers of the headgear allowing the PVC to be suspended in various forms of overlap.

OVERLAPS
Partial overlap for easier access through the strips.
If more resistance is needed against wind pressure or if greater insulation required, strips are double overlapped.

System not recommended for doors over 3000 mm high or if forklift traffic is passing through regularly.

STANDARD HEAVY DUTY STRIP CURTAINS

Heavy duty steel pole with bright orange sleeves and strip hanging sections.
Strips are cut and punched and prepared for bolting to the strips carriers.
Strips supplied on roll, perforated, to be cut off and trimmed to suit the curtain height.Carrier can be hinged or hinged and sliding to one side or bi-parting.
All headgear comes with fixing brackets for mounting to steel or brickwork openings.

At no extra cost we can supply red marker strip for positioning at each side of curtain to mark the edge of the curtain. - Just write "RED MARKER STRIPS" on your order.